CrystalLink USB 2.0 CAT5

   
CLK-1U2TP-100M

CLK-4U2TP-100M/PE

CLK-4U2TP-100M         CLK-2U2TP-100M

• Supports USB 2.0 (high-speed) and USB 1.1 (low and full speed)

• Extend USB device up to 330 feet (100m) over industry standard CAT5 cable

• 1 and 4-USB port models are available

• Standard USB hubs can be used to increase the maximum number of connected USB devices to 14 or 3 USB hubs and 11 USB devices

• to 500 ma of power is available at each USB port for powering high-power USB devices

• Plug-and-Play installation, no configuration or set-up needed

• Installation consists of:

  1.  Connecting the receiver to USB device(s)

  2.  Connect the transmitter to computer’s USB port

  3.  Connect the transmitter to the receiver with CAT5

       cable

  4. Apply power and the installation is complete

   

The CrystalLink USB 2.0 CAT5 extender is the extender of choice for extending your USB devices.  The CrystalLink USB CAT5 extender makes this possible by the use of standard CAT5 cable.  You can fully operate and control all of your USB devices from as far away as 330 feet using standard CAT5 cable.

Access to your USB device is made convenient in a variety of situations. You can locate users away from  hazardous environments where the USB device is located, locate devices away from areas vulnerable to theft, reduce noise and heat; increase desk and floor space.

If additional USB devices are needed, you can add up to 3 USB 4 port hubs to the four port receiver model and connect up to 11 USB devices.

The CrystalLink USB CAT5 extender supports all USB devices.  It is ideal for use in industrial control areas, digital signage, connecting web cameras, USB device printing, scanning and storage.  Supports all major operating systems including Windows®, Max®, and Linux®. 

Supports USB printers, scanners, web cameras, USB hard drives, flash drives, MP3 players and more.