| |
|
|
|
Fiber USB
2.0 / 1.1 Extender |
|
 |
Extend your
USB 2.0 high speed and USB 1.1 low and full speed devices up to
6 miles (10km) over fiber |
| |
Single-Mode
and Multi-Mode models available |
|
|
Designed to
support high powered USB devices with up to four USB ports |
|
|
Supports
USB printers, scanners, hard drives, audio devices, web cams,
game controllers, and many more USB device types
|
|
|
Standard
USB hubs can be used to increase the number of USB devices
connected to a maximum of 14 (including 3 hubs). |
|
|
|
|
 |
-
Single-Mode and
Multi-Mode models available
-
Supports USB 2.0 (high-speed)
and USB 1.1 (low and full speed)
-
Extend USB device up to 902'
(275m) over 62.5 / 125 µm Multi-Mode fiber, 1640' (500m) over 50 /
425 µm Multi-Mode and 6 miles (10km) over Single-Mode
fiber
-
Operates with USB 2.0
high-speed host controllers and USB 1.1 host controllers
-
Standard USB
hubs can be used to increase the maximum number of connected USB
devices to 14 (3 USB hubs and 11 USB
devices)
-
Up to 500 ma of power is
available at each USB port for powering high-power USB devices
-
Plug-and-Play installation, no
configuration or set-up needed
-
Installation
consists of:
1.
Connecting the receiver to USB device(s)
2. Connect the
transmitter to computer’s USB port
3. Connect the
transmitter to the receiver with fiber
cable
4. Apply power
and the installation is complete
|
|
The CrystalLink
USB Fiber extender is the extender of choice for extending your USB
devices. The CrystalLink USB Fiber extender makes this
possible by the use of standard Single-Mode or Multi-Mode fiber
cable (depending on model). You can fully operate and control all of
your USB devices from as far away as 6 miles using Single-Mode Fiber
cable.
Access to your
USB device is made convenient in a variety of situations. You can
locate users away from hazardous environments where the USB
device is located, locate devices away from areas vulnerable to
theft, reduce noise and heat; increase desk and floor space.
If additional
USB devices are needed, you can add USB hubs to the receiver model
and connect up to a total of 11 USB devices and 3 hubs.
The CrystalLink
USB Fiber extender supports all USB devices. It is ideal for
use in industrial control areas, digital signage, connecting web
cameras, USB device printing, scanning and storage.
Supports all
major operating systems including:
Windows®,
Max®,
and Linux®
Supports USB
printers, scanners, web cameras, USB hard drives, flash drives, MP3
players and many more USB 1.1 and 2.0 devices. |
