 |
-
Independently
display the contents of up to sixteen computers on up to sixteen
DVI-D displays
-
Non-blocking,
single-link DVI-D matrix switch
-
Max TMDS rate
of 2 x 1.65 Gb/sec
-
Resolutions up
to 1920 x 1200
-
Unique “Learn
Mode” determines the specs for any output monitor. Once
learned, the monitors do not have to be connected for the
computers to boot
-
Switch a video
source to any output monitor using the front panel push buttons or
sending serial commands to the unit
-
Intuitive RS232
software control (RoseControl) makes switching, routing, and
controlling the video displays quick and easy
-
Optional IR,
USB, and TCP/IP control
-
DVI-D video
transmission distance up to 30 feet
-
Set-up
multimedia presentations where information is displayed from
several computers
-
Automatic
receiver equalization
-
Rack-mountable
chassis
|
|
The UltraMatrix AV DVI-D matrix switch is the perfect addition to new or
existing installations that need to display 1 to 16 video sources to
1 to 16 remote DVI-D displays. Pick one video source and
display it on 1, 2 or all monitors.
Easy front panel selection of the video source to displayed on each
remote monitor. Just push a button and select the source, then
select the destination port. The front panel display shows
which computers are connected to the displays.
Selection can also be performed by using the provided RoseControl
software that sends switching command to the unit. With one
click on the cross-point, that computer’s video is instantly
switched to the selected DVI-D monitor. These commands are
sent using the RoseControl software installed on a computer or
laptop and connected to the RS232 port on the unit.
Pick the source,
pick the destination,
Click on the
cross-point in the matrix and instantly switch. |
