 |
-
Full dual link
DVI video support
-
Available
models: 1x4 & 1x8 dual-link DVI-I
-
Resolutions up
to 2560 x 1600
-
Select a
computer using the front panel switches, hotkeys, or the mouse
buttons
-
Switch dual link
digital video up to 300 Mpixels/sec
-
Front panel
indicator shows the currently active channel, which peripherals
are switched to the active channel, keyboard and mouse activity,
OSD status, upgrade mode, and power (Indicators vary depending on
model)
-
Digital or analog
video support (Analog requires a converter)
-
Supports a wide
range of USB 2.0 peripherals (HID and Transparent devices)
-
The 1x8 model
includes an OSD for easy configuration and port switching
-
RS232 serial port
for upgrades to the units firmware and for synchronizing two or
more Vista DVI plus units so multiple computers/video screens can
be switched and accessed
-
Flash
upgradeable
|
|
The Vista DVI Plus is the newest addition to Rose Electronics growing
line of KVM switches. All Vista DVI Plus models support both
digital and analog video, USB keyboards and mice, even specialty
keyboards and mice, audio, and two USB 2.0 peripherals.
Switching can be performed where the KVM, USB peripherals, and audio are
all switched together to a selected CPU port or you can switch the
KVM to CPU port #1, the USB peripherals to CPU port #2, and the
audio to CPU port #6.
The versatility of Vista DVI Plus makes selective switching easy using
either the front panel display, hotkey sequences, or sending serial
switching commands from a remote computer via a serial cable.
The Vista DVI Plus can be connected to an additional unit and
synchronized to switch video from a dual head computer.
Connect video 1 to one unit and video 2 to a second unit. When
a switching command is sent to the master unit, it sends the same
switching command to the secondary unit. Both units are
switched to the same CPU port and video 1 and video 2 are displayed
on the attached monitors.
|
