Xtensys Video Switch

•  The distance from the video sources to the Xtensys unit and from the Xtensys unit to the video receiver can be up to 1,000 feet using standard CATx cabling.

• Resolutions up to 1920 x 1440

• Auto equalization and skew compensation for a perfect display using CAT5, 5e, 6, or 7 cables.

• Video input ports connect to 1 – 64 video source and the video output ports connect to 1 – 16 video monitors (Depending on the model used).

• Advanced security for configuration and access

• Local configuration and switching through advanced OSD and automated remote switching using serial commands to the RS232 port

• Built in high performance video bus

• Switch up to 64 video sources to up to 16 video outputs

• Local KVM connections for quick access to the switch and manual switching

• Rack mount kits available for a 19” rack

• Designed and manufactured in USA

The Xtensys Video CATx matrix switch features the latest in video switching technology and can be deployed and scaled to almost any environment from the simplest to the most complex.

A miniature Rose video transmitter is connected to the video sources and to the RJ45 video input connectors on the unit using CATx cabling.

The remote monitors are connected to a miniature Rose video receiver and to the RJ45 video output connectors on the unit using CATx cabling. 

Upon power up the system will automatically measure the total cable distance and equalize the video for maximum clarity. It also performs a check on the video skew and automatically adjusts the RGB components of the video signal to eliminate any video skew caused by the cable type.

The built in OSD and hot-key system allows you to locally select and switch a video source using simple keyboard commands or from an on-screen list of the video sources. 

Video switching can also be performed by sending simple serial switching commands from a computer or terminal to the RS232 port on the unit.